==== Required information ====
- iRedMail version: 0.8.3
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): MySql
- Linux/BSD distribution name and version: Debian 6.0.6
====
Id like control the number of sent email by user, by time.
example: the user can send 10 email in 5 minutes, or something like that.

Hi zhang,
can i install iredmail on debian 7 wheezy??
thank's for help

==== Required information ====
- iRedMail version:
- Store mail accounts in which backend (LDAP/MySQL/PGSQL):
- Linux/BSD distribution name and version:
- Related log if you're reporting an issue:
====

==== Required information ====
- iRedMail version: 0.8.6
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): MySQL
- Linux/BSD distribution name and version: Ubuntu 12.04
====

I just want to confirm, using the default installation, is there a limit on how may emails can be sent by a single user in roundcube mail?

On our current email service, 500 emails an hour is the limit, if we exceed that, we wait an hour berfore we can send again.
We want to send more than 500 emails an hour when we send email announcements/memo.

Thanks!
nerdtron

==== Required information ====
- iRedMail version: iRedAdmin-Pro-MySQL-1.6
- Store mail accounts in which backend (LDAP/MySQL/PGSQL):
- Linux/BSD distribution name and version: CentOS 6.4
- Related log if you're reporting an issue:
====

The past 2 days we pushed out 30,000 plus emails  to clients which took a bit over 50+ hours to send.
A bit perturbed by sever lack of speed postfix was delivering mail we determined that the issue was that AMAVISD was processing all output emails. This of course is be design, however, it chews up entirely to much IO on the disks and slows delivery performance down severly.

Benchmark runs today with Amavisd disabled in /etc/postfix/main.cf:
#content_filter = smtp-amavis:[127.0.0.1]:10024

-- > The time to send 200 emails to the same destination address was 44 seconds.

With amavisd enabled and performing in its default configuration:
-- > The time to send 200 emails to the same destination address was 7min ~14sec

In an attempt to maintain INBOUND scanning but disable outbound scanning I followed the wiki
iredmail.org/wiki/index.php?title=IRedMail/FAQ/Disable.Spam.Virus.Scanning.for.Outgoing.Mails

Of which, for CentOS6, the amavisd.conf is not in /etc/amavisd.conf, but is now within it's own dir in /etc/amavisd/amavisd.conf

I've modified the section as follows, which appears to have mitigated some of the IO issues, however, to send 200 emails, will takes ~7minutes to complete.

The only conclusion I can come to is that Amavisd is still processing the outbound emails instead of skipping them.

*** Is there a concrete manner in which to determine if amavis d has stopped scanning outbound emails? ***

The only indication I can see so far in the logs are:
Full scanning shows this value: "Hits: 1.179"
With config below, logs show this value: "Hits: -"

Also, is  the following the proper way to reload the amavisd configs?
# /etc/init.d/amavisd restart

In a nutshell I need to get send performance up to speed while still maintaining inbound scans and stop outbound scanning.

/etc/amavisd/amavisd.conf
=========================

$policy_bank{'MYNETS'} = {   # mail originating from @mynetworks
  originating => 1,  # is true in MYNETS by default, but let's make it explicit
#  os_fingerprint_method => undef,  # don't query p0f for internal clients
#-  allow_disclaimers => 1, # enables disclaimer insertion if available

#---> PREVENT SCANNING OF OUTBOUND MESSAGES <---#
#################################################
    bypass_spam_checks_maps => [1],             #
    bypass_virus_checks_maps => [1],            #
    bypass_header_checks_maps => [1],           #
#################################################
};

$policy_bank{'ORIGINATING'} = {  # mail supposedly originating from our users
  originating => 1,  # declare that mail was submitted by our smtp client
#-  allow_disclaimers => 1,  # enables disclaimer insertion if available
  # notify administrator of locally originating malware
#-  virus_admin_maps => ["root\@$mydomain"],
#-  spam_admin_maps  => ["root\@$mydomain"],
#-  warnbadhsender   => 1,
  # forward to a smtpd service providing DKIM signing service
#-  forward_method => 'smtp:[127.0.0.1]:10027',
  # force MTA conversion to 7-bit (e.g. before DKIM signing)
#-  smtpd_discard_ehlo_keywords => ['8BITMIME'],
#-  bypass_banned_checks_maps => [1],  # allow sending any file names and types
#-  terminate_dsn_on_notify_success => 0,  # don't remove NOTIFY=SUCCESS option

#---> PREVENT SCANNING OF OUTBOUND MESSAGES <---#
#################################################
    bypass_spam_checks_maps => [1],             #
    bypass_virus_checks_maps => [1],            #
    bypass_header_checks_maps => [1],           #
#################################################

};

$policy_bank{'MYUSERS'} = {
    # declare that mail was submitted by our smtp client
    originating => 1,

    # enables disclaimer insertion if available
#-    allow_disclaimers => 1,

    # notify administrator of locally originating malware
#-    virus_admin_maps => ["root\@$mydomain"],
#-    spam_admin_maps  => ["root\@$mydomain"],
#-    warnbadhsender   => 0,

    # forward to a smtpd service providing DKIM signing service
    #forward_method => 'smtp:[127.0.0.1]:10027',

    # force MTA conversion to 7-bit (e.g. before DKIM signing)
#-    smtpd_discard_ehlo_keywords => ['8BITMIME'],

    # don't remove NOTIFY=SUCCESS option
#-    terminate_dsn_on_notify_success => 0,

    # don't perform spam/virus/header check.

#---> UNCOMMENTED TO PREVENT SCANNING OF OUTBOUND MESSAGES <---#
#################################################
    bypass_spam_checks_maps => [1],             #
    bypass_virus_checks_maps => [1],            #
    bypass_header_checks_maps => [1],           #
#################################################

    # allow sending any file names and types
    #bypass_banned_checks_maps => [1],
};

==== Required information ====
- iRedMail version: 0.8.4
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): Mysql
- Linux/BSD distribution name and version: Centos 5.8 64 Bit
- Related log if you're reporting an issue:

http://iredmail.org/yum/rpms/5/clamav-d … 86_64.rpm: [Errno -1] Package does not match intended download
Trying other mirror.

Error Downloading Packages:
  clamav-db-0.97.7-1.el5.rf.x86_64: failure: clamav-db-0.97.7-1.el5.rf.x86_64.rpm from iRedMail: [Errno 256] No more mirrors to try.

< ERROR > Installation failed, please check the terminal output.
< ERROR > If you're not sure what the problem is, try to get help in iRedMail
< ERROR > forum: http://www.iredmail.org/forum/

====

Please suggest as soon as possible

==== Required information ====
- iRedMail version: 0.8.4
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): LDAP
- Linux/BSD distribution name and version: Debian 6 Squeeze 64bit
- Related log if you're reporting an issue:
====
Hey, I've just installed iRedMail on my Debian Squeeze. I'm getting this error in the mail screen:
https://flamingworks.com/mail/

Thank you..

==== Required information ====
- iRedMail version: 0.8.4
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): MySql
- Linux/BSD distribution name and version: 12.0.4 LTS
- Related log if you're reporting an issue:
====

I tested Dovecot connection with telnet on port 143.  I am unable to log into Dovecot server remotely.

Commands on local access: telnet localhost 143 [ENTER]
* OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready.

Commands on remote access: telnet server_address 143 [ENTER]
* OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready.

Note: I have modified Dovecot conf to plain text authentication...
ssl=yes
disable_plaintext_auth=no

Please help on allowing remote login.

==== Required information ====
- iRedMail version: 0.8.4
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): Mysql
- Linux/BSD distribution name and version: debian/squeeze
- Related log if you're reporting an issue:
====

Zhang,

Are you talking about Sender White-listing or Recipient White-listing in the following thread ?
http://www.iredmail.org/forum/post21835.html#p21835

http://policyd.sourceforge.net/readme.html
The url you sent says that :
    Please note that address whitelist will be matched only against
    the  sender address. For recipient  whitelisting,  please refer
    to the opt-in/opt-out section below.

In my case, I am the recipient (abc@mydomain.org). There is an email sender john@bank.com, which is getting rejected by my server because of greylist=new and john's server doesn't try again. But John is not a spammer. So I want to whitelist John.

So I think the solution is "Sender Whitelisting" in the above readme url.

Please clarify. Thanks.

==== Required information ====
- iRedMail version: iRedMail-0.8.4
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): LDAP
- Linux/BSD distribution name and version: Centos 6.4
- Related log if you're reporting an issue: n/a
====
If I install Samba4 on virgin Centos Server, then follow wiki:
  http://www.iredmail.org/wiki/index.php? … y.iRedMail

I expect to have a problem with port 389, what does everyone think about modifying port in /etc/default/slapd to read:
   SLAPD_SERVICES="ldap://localhost:3389 ldapi:///"

Will that be enough to get everything working since Postfix, Roundcube & Dovecot will be modified to use localhost's AD ?

Any comments regarding this project? Should it work? Has it failed? Has it succeeded for others?

======== Required information ====
- iRedMail version: 0.8.4
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): MySQL
- Linux/BSD distribution name and version: CentOS 6.2 64bit
- Related log if you're reporting an issue:  see terminal log below desription.
====

I installed iRedMail-0.8.4 on a "Fresh" install of CentOS 6.2; the OS is installed on a virtual machine (OpenVZ).
During install I choose to use iRedMail's iptable rules.
after the post install reboot, I can no longer resolve DNS with the firewall up. I can still dig google.com with the firewall down. No changes were made to my resolv.conf file and the files in /var/spool/postfix/etc/ match the /etc/ files.

On previous attempts to fix this issue myself I added the following rules to iptables to no avail:
iptables -A INPUT -p tcp --dport 53 -j ACCEPT
iptables -A INPUT -p udp --dport 53 -j ACCEPT

I have no idea what i'm overlooking. Below you will find the results of dig google.com with the firewall up then down, as well as the result for iptables -L -n :

Thanks in advance

******************************************************************************************************
[root@bvmdal-centos01 ~]# ping -c3 google.com
PING google.com (74.125.227.97) 56(84) bytes of data.
64 bytes from dfw06s16-in-f1.1e100.net (74.125.227.97): icmp_seq=1 ttl=56 time=22.5 ms
64 bytes from dfw06s16-in-f1.1e100.net (74.125.227.97): icmp_seq=2 ttl=56 time=22.4 ms
64 bytes from dfw06s16-in-f1.1e100.net (74.125.227.97): icmp_seq=3 ttl=56 time=22.4 ms

--- google.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2024ms
rtt min/avg/max/mdev = 22.431/22.469/22.509/0.126 ms
******************************************************************************************************
[root@bvmdal-centos01 ~]# dig google.com

; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.4 <<>> google.com
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 55050
;; flags: qr rd ra; QUERY: 1, ANSWER: 11, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;google.com.                    IN      A

;; ANSWER SECTION:
google.com.             218     IN      A       74.125.227.97
google.com.             218     IN      A       74.125.227.96
google.com.             218     IN      A       74.125.227.101
google.com.             218     IN      A       74.125.227.102
google.com.             218     IN      A       74.125.227.100
google.com.             218     IN      A       74.125.227.103
google.com.             218     IN      A       74.125.227.110
google.com.             218     IN      A       74.125.227.104
google.com.             218     IN      A       74.125.227.105
google.com.             218     IN      A       74.125.227.98
google.com.             218     IN      A       74.125.227.99

;; Query time: 39 msec
;; SERVER: 8.8.8.8#53(8.8.8.8)
;; WHEN: Sat Jun 15 20:42:36 2013
;; MSG SIZE  rcvd: 204
******************************************************************************************************
[root@bvmdal-centos01 ~]# /etc/init.d/iptables start
iptables: Applying firewall rules:                         [  OK  ]
[root@bvmdal-centos01 ~]# dig google.com

; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.4 <<>> google.com
;; global options: +cmd
;; connection timed out; no servers could be reached

******************************************************************************************************
[root@bvmdal-centos01 ~]# dig google.com

; <<>> DiG 9.8.2rc1-RedHat-9.8.2-0.17.rc1.el6_4.4 <<>> google.com
;; global options: +cmd
;; connection timed out; no servers could be reached
[root@bvmdal-centos01 ~]# iptables -L -n
Chain INPUT (policy DROP)
target     prot opt source               destination
ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0           state RELATED,ESTABLISHED
ACCEPT     all  --  0.0.0.0/0            0.0.0.0/0
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:80
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:443
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:25
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:587
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:110
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:995
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:143
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:993
ACCEPT     tcp  --  0.0.0.0/0            0.0.0.0/0           tcp dpt:22
ACCEPT     icmp --  0.0.0.0/0            0.0.0.0/0           icmp type 8

Chain FORWARD (policy DROP)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination
******************************************************************************************************
[root@bvmdal-centos01 ~]# cat /var/spool/postfix/etc/resolv.conf
search bvmdal-centos01.autom8eng.com
nameserver 8.8.8.8
nameserver 8.8.4.4
******************************************************************************************************
[root@bvmdal-centos01 ~]# cat /var/spool/postfix/etc/hosts
127.0.0.1 localhost.localdomain localhost localhost4.localdomain4 localhost4
# Auto-generated hostname. Please do not remove this comment.
172.246.252.204 bvmdal-centos01.autom8eng.com  bvmdal-centos01
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

Hello ,
I have small question with iRedMail with Postfix,
I have 64 public IP's with daily email sending over 50,000+ from All domains. How to configure server ip rotation every 60 sec with all IP's
Pls help me get it done this
Thanks in advance

==== Required information ====
- iRedMail version: iRedMail-0.8.4
- Store mail accounts in which backend (MySQL):
- Linux/BSD distribution name and version: CentOS 6
- Related log if you're reporting an issue:
====

Hello guys, I had a sucessful instalation of iRedMail before in a VPS in DigitalOcean, but after I try to install ruby (rvm and rails) the server stopped working...

So I deleted the server (completely) and created another... Installed apache, mysql, blablabla and installed iredmail sucessfully.
But when I try to send an e-mail they said to me "SMTP Error: SMTP error(451): Failed to add recipient".

And when I try to send from gmail to my iredmail account I don't receive the e-mail.

Could you help-me? I don't know why doesn't works, iRedMail is really simple to install...

Thanks for the support, cheers! ;)

==== Required information ====
- iRedMail version: 0.8.4
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): MySQL
- Linux/BSD distribution name and version: Ubuntu Server 12.04 64bits
- Related log if you're reporting an issue:

----SENDING-----

Jun 16 19:56:08 localhost postfix/error[1790]: C04A260CC5: to=<root@nudemail.tk>, relay=none, delay=44463, delays=44463/0.01/0/0.01, dsn=4.3.0, status=deferred (mail transport unavailable)
Jun 16 19:56:08 localhost postfix/error[1791]: 0B94260CDC: to=<root@nudemail.tk>, relay=none, delay=44459, delays=44459/0.01/0/0, dsn=4.3.0, status=deferred (mail transport unavailable)
Jun 16 19:56:09 localhost postfix/smtpd[1783]: connect from localhost[127.0.0.1]
Jun 16 19:56:09 localhost postfix/smtpd[1783]: warning: connect to 127.0.0.1:10031: Connection refused
Jun 16 19:56:09 localhost postfix/smtpd[1783]: warning: problem talking to server 127.0.0.1:10031: Connection refused
Jun 16 19:56:10 localhost postfix/smtpd[1783]: warning: connect to 127.0.0.1:10031: Connection refused
Jun 16 19:56:10 localhost postfix/smtpd[1783]: warning: problem talking to server 127.0.0.1:10031: Connection refused
Jun 16 19:56:10 localhost postfix/smtpd[1783]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.5 Server configuration problem; from=<conta@nudestay.com.br> to=<jacksonbenete@gmail.com> proto=ESMTP helo=<nudemail.tk>
Jun 16 19:56:10 localhost roundcube: SMTP Error: SMTP error: Failed to add recipient 'jacksonbenete@gmail.com' in /usr/share/apache2/roundcubemail-0.8.6/program/include/main.inc on line 1485 (POST /mail/?_unlock=loading1371412569385&_lang=undefined?_task=mail&_action=send)
Jun 16 19:56:10 localhost postfix/smtpd[1783]: disconnect from localhost[127.0.0.1]

-----RECEIVING-----

Jun 16 19:56:08 localhost postfix/error[1790]: C04A260CC5: to=<root@nudemail.tk>, relay=none, delay=44463, delays=44463/0.01/0/0.01, dsn=4.3.0, status=deferred (mail transport unavailable)
Jun 16 19:56:08 localhost postfix/error[1791]: 0B94260CDC: to=<root@nudemail.tk>, relay=none, delay=44459, delays=44459/0.01/0/0, dsn=4.3.0, status=deferred (mail transport unavailable)
Jun 16 19:56:09 localhost postfix/smtpd[1783]: connect from localhost[127.0.0.1]
Jun 16 19:56:09 localhost postfix/smtpd[1783]: warning: connect to 127.0.0.1:10031: Connection refused
Jun 16 19:56:09 localhost postfix/smtpd[1783]: warning: problem talking to server 127.0.0.1:10031: Connection refused
Jun 16 19:56:10 localhost postfix/smtpd[1783]: warning: connect to 127.0.0.1:10031: Connection refused
Jun 16 19:56:10 localhost postfix/smtpd[1783]: warning: problem talking to server 127.0.0.1:10031: Connection refused
Jun 16 19:56:10 localhost postfix/smtpd[1783]: NOQUEUE: reject: RCPT from localhost[127.0.0.1]: 451 4.3.5 Server configuration problem; from=<conta@nudestay.com.br> to=<jacksonbenete@gmail.com> proto=ESMTP helo=<nudemail.tk>
Jun 16 19:56:10 localhost roundcube: SMTP Error: SMTP error: Failed to add recipient 'jacksonbenete@gmail.com' in /usr/share/apache2/roundcubemail-0.8.6/program/include/main.inc on line 1485 (POST /mail/?_unlock=loading1371412569385&_lang=undefined?_task=mail&_action=send)
Jun 16 19:56:10 localhost postfix/smtpd[1783]: disconnect from localhost[127.0.0.1]
Jun 16 20:00:43 localhost postfix/smtpd[1813]: connect from mail-bk0-f54.google.com[209.85.214.54]
Jun 16 20:00:44 localhost postfix/smtpd[1813]: warning: connect to 127.0.0.1:10031: Connection refused
Jun 16 20:00:44 localhost postfix/smtpd[1813]: warning: problem talking to server 127.0.0.1:10031: Connection refused
Jun 16 20:00:45 localhost postfix/smtpd[1813]: warning: connect to 127.0.0.1:10031: Connection refused
Jun 16 20:00:45 localhost postfix/smtpd[1813]: warning: problem talking to server 127.0.0.1:10031: Connection refused
Jun 16 20:00:45 localhost postfix/smtpd[1813]: NOQUEUE: reject: RCPT from mail-bk0-f54.google.com[209.85.214.54]: 451 4.3.5 Server configuration problem; from=<jacksonbenete@gmail.com> to=<conta@nudestay.com.br> proto=ESMTP helo=<mail-bk0-f54.google.com>
Jun 16 20:00:45 localhost postfix/smtpd[1813]: disconnect from mail-bk0-f54.google.com[209.85.214.54]
Jun 16 20:01:08 localhost postfix/qmgr[15728]: 6D3BF61169: from=<www-data@nudemail.tk>, size=896, nrcpt=1 (queue active)
Jun 16 20:01:08 localhost postfix/qmgr[15728]: warning: connect to transport private/smtp-amavis: No such file or directory
Jun 16 20:01:08 localhost postfix/error[1825]: 6D3BF61169: to=<contato@nudestay.com.br>, relay=none, delay=936, delays=936/0.01/0/0.01, dsn=4.3.0, status=deferred (mail transport unavailable)

====

==== Required information ====
- iRedMail version:
- Store mail accounts in which backend (LDAP/MySQL/PGSQL):
- Linux/BSD distribution name and version:
- Related log if you're reporting an issue:
======== Required information ====
- iRedMail version: 0.8.4
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): MySQL
- Linux/BSD distribution name and version: Ubuntu Server 12.04 LTS
- Related log if you're reporting an issue:
====

I'm setting up a new email server for my employer. The old email server has to go. I ran the iRedMail installation without a problem, in addition to applying a static IP to the server. The interfaces values are essentially the same as the old email server, same IPv4 address, gateway, etc. I am able to send emails without a problem; however, I cannot receive emails. What have I done wrong???

The DNS records are correct as well. I ran "dig" and received the appropriate response.

==== Required information ====
- iRedMail version:
- Store mail accounts in which backend (LDAP/MySQL/PGSQL):
- Linux/BSD distribution name and version:
- Related log if you're reporting an issue:
======== Required information ====
- iRedMail version: iRedMail-0.8.4
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): MySQL
- Linux/BSD distribution name and version: CentOS 6.2 64bit on OpenVZ
- Related log if you're reporting an issue: postconf -n follows full description
====

I installed iRedMail-0.8.4 on a "Fresh" install of CentOS 6.2; the OS is installed on a virtual machine (OpenVZ). Had an immediate issue with the firewall which has been disabled until email functionality is working. When I send an email from Roundcube on the server, It initially shows to send, but a Undeliverable mail message appears in the inbox.

*************************************************************************************************
This is the mail system at host bvmdal-centos01.autom8eng.com.

I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.

For further assistance, please send mail to postmaster.

If you do so, please include this problem report. You can
delete your own text from the attached returned message.

                   The mail system

<???????@gmail.com>: host gmail-smtp-in.l.google.com[173.194.77.27] said:
    550-5.1.1 The email account that you tried to reach does not exist. Please
    try 550-5.1.1 double-checking the recipient's email address for typos or
    550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1
*************************************************************************************************

the address was correct; question marks added to protect email address.

In like fashion when sending an email to the iRedMail account(s) from an external email account I get the following message:

SMTP Error (550): Failed to add recipient "?????@autom8eng.com" (No Such User Here).

postconf -n posted below; thank you in advance for your help.

****************************************************************************************************************
postconf -n
[root@bvmdal-centos01 var]# postconf -n
alias_database = hash:/etc/postfix/aliases
alias_maps = hash:/etc/postfix/aliases
allow_min_user = no
allow_percent_hack = no
biff = no
bounce_queue_lifetime = 4h
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
data_directory = /var/lib/postfix
debug_peer_level = 2
delay_warning_time = 0h
disable_vrfy_command = yes
enable_original_recipient = no
home_mailbox = Maildir/
html_directory = no
inet_interfaces = all
inet_protocols = ipv4
mail_owner = postfix
mailbox_command = /usr/libexec/dovecot/deliver
mailq_path = /usr/bin/mailq.postfix
manpage_directory = /usr/share/man
maximal_backoff_time = 4000s
maximal_queue_lifetime = 4h
message_size_limit = 15728640
minimal_backoff_time = 300s
mydestination = $myhostname, localhost, localhost.localdomain, localhost.$myhostname
mydomain = autom8eng.com
myhostname = bvmdal-centos01.autom8eng.com
mynetworks = 127.0.0.0/8
mynetworks_style = subnet
myorigin = bvmdal-centos01.autom8eng.com
newaliases_path = /usr/bin/newaliases.postfix
proxy_read_maps = $canonical_maps $lmtp_generic_maps $local_recipient_maps $mydestination $mynetworks $recipient_bcc_maps $recipient_canonical_maps $relay_domains $relay_recipient_maps $relocated_maps $sender_bcc_maps $sender_canonical_maps $smtp_generic_maps $smtpd_sender_login_maps $transport_maps $virtual_alias_domains $virtual_alias_maps $virtual_mailbox_domains $virtual_mailbox_maps $smtpd_sender_restrictions
queue_directory = /var/spool/postfix
queue_run_delay = 300s
readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES
recipient_bcc_maps = proxy:mysql:/etc/postfix/mysql/recipient_bcc_maps_user.cf, proxy:mysql:/etc/postfix/mysql/recipient_bcc_maps_domain.cf
recipient_delimiter = +
relay_domains = $mydestination, proxy:mysql:/etc/postfix/mysql/relay_domains.cf
sample_directory = /usr/share/doc/postfix-2.6.6/samples
sender_bcc_maps = proxy:mysql:/etc/postfix/mysql/sender_bcc_maps_user.cf, proxy:mysql:/etc/postfix/mysql/sender_bcc_maps_domain.cf
sendmail_path = /usr/sbin/sendmail.postfix
setgid_group = postdrop
smtp_data_init_timeout = 240s
smtp_data_xfer_timeout = 600s
smtpd_data_restrictions = reject_unauth_pipelining
smtpd_helo_required = yes
smtpd_helo_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_non_fqdn_helo_hostname, reject_invalid_helo_hostname, check_helo_access pcre:/etc/postfix/helo_access.pcre
smtpd_recipient_restrictions = reject_unknown_sender_domain, reject_unknown_recipient_domain, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unlisted_recipient, check_policy_service inet:127.0.0.1:7777, permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination, check_policy_service inet:127.0.0.1:10031
smtpd_reject_unlisted_recipient = yes
smtpd_reject_unlisted_sender = yes
smtpd_sasl_auth_enable = yes
smtpd_sasl_authenticated_header = no
smtpd_sasl_local_domain =
smtpd_sasl_path = ./dovecot-auth
smtpd_sasl_security_options = noanonymous
smtpd_sasl_type = dovecot
smtpd_sender_login_maps = proxy:mysql:/etc/postfix/mysql/sender_login_maps.cf
smtpd_sender_restrictions = permit_mynetworks, reject_sender_login_mismatch, permit_sasl_authenticated
smtpd_tls_CAfile = /etc/pki/tls/certs/iRedMail_CA.pem
smtpd_tls_cert_file = /etc/pki/tls/certs/iRedMail_CA.pem
smtpd_tls_key_file = /etc/pki/tls/private/iRedMail.key
smtpd_tls_loglevel = 0
smtpd_tls_security_level = may
swap_bangpath = no
tls_random_source = dev:/dev/urandom
transport_maps = proxy:mysql:/etc/postfix/mysql/transport_maps_user.cf, proxy:mysql:/etc/postfix/mysql/transport_maps_domain.cf
unknown_local_recipient_reject_code = 550
virtual_alias_domains =
virtual_alias_maps = proxy:mysql:/etc/postfix/mysql/virtual_alias_maps.cf, proxy:mysql:/etc/postfix/mysql/domain_alias_maps.cf, proxy:mysql:/etc/postfix/mysql/catchall_maps.cf, proxy:mysql:/etc/postfix/mysql/domain_alias_catchall_maps.cf
virtual_gid_maps = static:2000
virtual_mailbox_base = /var/vmail
virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql/virtual_mailbox_domains.cf
virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql/virtual_mailbox_maps.cf
virtual_minimum_uid = 2000
virtual_transport = dovecot
virtual_uid_maps = static:2000
***************************************************************************************************************

==== Required information ====
- iRedMail version: iRedMail-0.7.2
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): Mysql
- Linux/BSD distribution name and version: Cent OS 5.4 64 bit
- Related log if you're reporting an issue: Not able to receive email on some email ID's

I am receiving bounce massage for some email id's as below

Command died with signal 7:     "/usr/libexec/dovecot/deliver"

Please help me out to resolve this issue.

====

Hi Zhang,

I have just install iredmail , and i have delete accidently the password of iredadmin in the file settings.ini from /usr/share/apache2/iredamin
There is the lines:
[iredadmin]
# Database used to store iRedAdmin data. e.g. sessions, log.
host =  127.0.0.1
port =  3306
  db = iredadmin
user = iredadmin
passwd = ...

And now when i would like to delete a message from my email box i have this error:
Error: mysql(127.0.0.1): Connect failed to database (iredadmin): Access denied for user 'iredadmin'@'localhost' (using password: YES) - waiting for 125 seconds before retry

Please how can i change this password and what's kind of cryption of password.

Thank's for help

==== Required information ====
- iRedMail version:
- Store mail accounts in which backend (LDAP/MySQL/PGSQL):
- Linux/BSD distribution name and version:
- Related log if you're reporting an issue:
====

==== Required information ====
- iRedMail version: latest
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): mysql
- Linux/BSD distribution name and version: centos 6.3
- Related log if you're reporting an issue:
====

Hi there,

I'm just wondering, if I were to set up iRedMail with gluster replication, as indicated in the wiki, would master\slave\slave mysql replication work, or would it break something.

Thank you.

==== Required information ====
- iRedMail version: 0.8.1
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): LDAP
- Linux/BSD distribution name and version: Centos 6.3
- Related log if you're reporting an issue:
====
Due to some reasons I need to move vmail folder to another drive. I tried to do rsync & I was able to copy all the files and structure with same old date and time stamp.
I made symbolic link and new mail flow was fine but problem is, all the mail boxes started downloading old mails again .

Is there any way where I can copy location of the folder without this problem.

Thanks

Pine

==== Required information ====
- iRedMail version: 0.8.3
- Store mail accounts in which backend (LDAP/MySQL/PGSQL): LDAP >>> Active Directory
- Linux/BSD distribution name and version: CentOS 5.8
- Related log if you're reporting an issue: --
====

When the user mailbox exceeded the limit, all new messages are reject from the any sender without any message. (In my Exchange Client I receive: Your message was deleted without read). The quota_exceeded_message don't work in my server.

I use:
#############################

protocol lda {
    postmaster_address = root
    auth_socket_path = /var/run/dovecot/auth-master
    mail_plugins = quota sieve autocreate
    sieve_global_path = /var/vmail/sieve/dovecot.sieve
    log_path = /var/log/sieve.log
    quota_full_tempfail = yes
}

plugin {  quota_rule = *:storage=300M }

plugin { quota_exceeded_message = Quota exceeded }

##############################################

When change the quota_full_tempfail to "no", the messajes automatically rejected and the sender receive "Your message was deleted without read". When the quota_full_tempfail is set to "yes", the message is reject without messages to sender.

I need that the senders receive: "Automatically rejected mail: Quota exceeded".

Any idea?

==== Required information ====
- iRedMail version: 0.8.3
- Store mail accounts in which backend (MySQL):
- Linux/BSD distribution name and version:  CentOS 6.4
- Related log if you're reporting an issue:
====
Did a yum update and dovecot failed to start on reboot. Errors listed below:
Jun 18 12:07:46 config: Error: Module is for different version 2.0.21: /usr/lib/dovecot/settings/libmanagesieve_login_settings.so
Jun 18 12:07:46 config: Error: Module is for different version 2.0.21: /usr/lib/dovecot/settings/libmanagesieve_settings.so

Managed to get it working by editing the enabled protocols line as below:
protocols = pop3 imap #sieve

What killed it and what am I missing ?